15kw 22kw 30kw 44kw V2g Vehicle to Grid Bidirectional EV Charging Station IP54

• Customization: Available
• Connector Type: CCS1, CCS2, CHAdeMO, GB/T
• Installation: Floor Type
• Model NO.: SK-V2G-15kW/22kW/30kW/44kW
• Location: Private Use
• Number of Charging Interfaces: One Pile with One Charge
• Start Mode: Credit Card Payment, Mobile Remote Operation, RFID Authentic
• Rated Power: 22kw
• Working Temperature: -40℃~+75℃, Use with Derating Above 55 Celcius
• Cooling Method: Air Cooling
• Altitude: 2000m
• Rated Voltage & Input Current Range: 380/400VAC, Three-Phase Without Neutral Wire Ran
• Lnput Voltage: 260VAC~530VAC ; 45Hz~65Hz
• Output Voltage: 150VDC~1000VDC
• Ingress Protection: IP54 ; Ik10
• Dimensions (Lxdxh): 630mm X 260mm X 1600mm Pillar
• Length of Charging Cable: 4m/5m (Optional)
• Communication: Ethermet - Standard 3G/4G Modem (Optional)
• Transport Package: Wooden Case Package
• Specification: 970*970*1950 mm
• Trademark: MIDA
• Origin: China

Product Description

15kW 22kW 30kW 44kW V2G Vehicle to Grid Bidirectional EV Charging Station IP54

The 15kW 22kW 30kW 44kW Vehicle to Grid EV Charger, also known as V2G charger, is a revolutionary system that enables two-way energy flow between EVs and the electrical grid. Traditionally, EVs have only been seen as consumers of electricity, but with V2G technology, they can now become providers as well. By integrating EVs into the energy grid, this technology unlocks numerous benefits for both EV owners and the overall electrical infrastructure.

A V2G (Vehicle-to-Grid) charger station facilitates bidirectional energy flow between electric vehicles (EVs) and the power grid.V2G (Vehicle-to-Grid) charger enables bidirectional power flow between an electric vehicle (EV) and the power grid, allowing EVs to both charge and discharge energy back into the grid. This technology helps balance energy demand and supply, potentially reducing reliance on fossil fuels and offering drivers the opportunity to sell excess energy back to the grid.

V2G (Vehicle-to-Grid) lets electric vehicles do more than just move. It's a new kind of energy solution where your EV can store energy and send it back to your home or the grid. Your EV can charge as usual, but it can also send power back - helping you use stored energy when it matters most.




 

Product Features

V2G Charger 15kW/ 22kW/ 30kW/ 44kW V2G Vehicle to Grid Bidirectional EV Charging Station CCS CHAdeMO GB/T Connector
 

✓ 15kw 22kW 30kW 44 kW is the perfect EV charging companion, now and in the future.

✓ With a NEMA 3R-rated enclosure, the charger can be safely operated indoors and outdoors.

✓ Adjust your charger AC input situations where your power supply may be limited.

✓ Save energy costs by taking advantage of low electricity rates.

✓ Help stabilize the power grid by providing energy peak demand.

✓ Integrate your charging infrastructure to your existing battery energy storage system.

 

Product Parameters

Product Number	SK-22kW-V2G
Working environment	Working temperature		-40°C~+75°ºC, use with derating above 55ºC
	Storage Temp		-40ºC~+80°C
	Relative humidity		≤ 95%RH, no condensation
	Cooling method		Air cooling
	Altitude		2000m, the power needs to be reduced for use above 2000m
Charging mode	AC input	Rated voltage & input current range	380/400Vac, three-phase without neutral wire system; 0~43A
		lnput voltage/frequency range	260Vac ~ 530Vac; 45Hz ~ 65HZ
		Power factor	≥ 0.99 (full load output)
		Current distortion THD	< 5% (50%~100% full load output power)
	DC output	Rated power	22kw
		Output voltage/ current range	150Vdc ~ 1000Vdc, 0-73.3A
		Voltage stabilization accuracy	< +0.5%
		Steady flow accuracy	≤ +1% (output load 20%~100% rated range)
		Efficiency	> 95%
Discharge mode	DC input	DC input voltage & output power	300vdc-1000Vdc; 22kW constant power output
		Maximum current	73.3A
	AC output	Output AC voltage & output power	22kW constant power output at 260Vac~530Vac; 320Vac~530Vac
		Rated power/ current output	22kW/ 33.3A
		ACfrequency	50Hz/60Hz
		THD	< 5%
		Output power factor	Can be set, setting range is 0.8~1, -0.8~-1
		Efficiency (peak)	>95%
Alarm and protection	Input over/ under voltage protection
	Output overvoltage protection
	Overcurrent and short circuit protection
	Over temperature protection
	Emergency stop protection
	SPD protection
Dimensions (LxDxH)	630mm x 260mm x 1600mm Pillar
	630mm x 260mm x 750mm Wall
Ingress Protection	IP54 II IK10
Length of charging cable	4m/5m (0ptional)
Access Control	RFID: ISO/IEC 14443A/B Credit Card Reader (Optional)
Communication	Ethermet-Standard 3G/4G Modem (Optional)

 

Detailed Photos

 

Company Profile

Shanghai Mida EV Power Co., Ltd is a professional supplier of electric vehicle com-ponents,including all kinds of EV plugs and sockets, EV cables, EV connectors, and EV charging stations. All of our products come with CE, PSE, TUV and UL certification. We sell our products to domestic and overseas markets and have a very good re-putation. Our products are especially popular in Europe and the America. At present, Mida EV power pay close attention to the development of new energy auto-motive industry, we determined to become the industry leader and innovator.

Mida Group constantly strive to adhere to our business philosophy of "quality is the soul,the principle of good faith,Innovation leads the future ". In order to  establish a long-term relationship with all of our customers,we will offer a competitive price,high quantity products and a good after-sales-service  and we will improve our com-petitiveness and achieve a win-win situation for us as well as our clients.We are looking forward to cooperation with you !