Uxg1K022 22kw Bidirectional AC-DC (V2G) Charge-Discharge Power Module

• Customization: Available
• Connector Type: CCS1, CCS2, CHAdeMO, GB/T
• Installation: Floor Type
• Model NO.: UXG1K022
• Location: Public Use
• Number of Charging Interfaces: One Pile with One Charge
• AC Input Connection: 3L + PE
• Input Voltage: 260V~530VAC
• Input Frequency: 50±5Hz
• Input Power Factor: ≥0.99
• Rated Output Power: 40kw
• Output Voltage Range: 200V~1000VDC
• Output Current Range: 0.5-67A
• Peak Efficiency: ≥ 96%
• Operating Temperature (°C): -40°C~+75°C, Derating From 55°C
• Humidity (%): ≤95% Rh, Non-Condensing
• Altitude (M): ≤2000m, Derating Above 2000m
• Cooling Method: Fan Cooling
• Safety: CE, TUV
• Weight (Kg): ≤ 13kg
• Transport Package: Standard Box
• Specification: 460*218*84mm (L*W*H)
• Trademark: MIDA
• Origin: China

Product Description

UXG1K022 22kW Bidirectional AC-DC (V2G) Charge-Discharge Power Module

UXG1K022 22kW Bidirectional AC-DC (V2G) Charge-discharge Power Module

This UXG1K022 22kw V2G Charging Module support DC and DC dual input mode, which combines battery charging by the power grid and vehicle charging by battery. At the same time, it meets the size requirements of three unified module of State Grid.

Model No.: UXG1K022
Input Voltage: 260V~530VAC
Rated Output Power: 20kW
Output Voltage Range: 200V~1000Vdc
Peak Efficiency: ≥ 95.5%
Power Factor: ≥0.99
Current Regulation Accuracy: ≤±1%
Communication Protocol: CAN

Operating Temperature: -40℃~+75℃

Advantages

Wide working output voltage: 260V~530V for AC side, 200V~1000V for DC side
Support bidirectional energy flow between the battery and the grid
Dual DSP design enables full digital control
High power density of 36W/in³
V2G 22KW Power Module for EV Charging Station
UXG1K022-22kW Bidirectional AC-DC (V2G) Chargedischarge Module

AC side voltage range of 260-530Vac with a frequency range of 45-65Hz, adaptable to various grid environments.
DC side voltage range of 200-1000Vdc, meet the rapid charge and discharge requirements of various electric vehicles and battery packs.
Wide constant power operating range of 300-1000Vdc, suitable for fast charging and discharging in lowvoltage scenarios.
Meet requirements for CE and UL certifications.
EMC Meets Class B requirements of EN61000-6-1 and EN61000-6-3 standards, with low electromagnetic radiation and strong anti-interference capability.

Conversion efficiency of 97.5%, promoting energy conservation and environmental protection.

ULTRA WIDE OUTPUT VOLTAGE RANGE COMPATIBLE WITH EVERY EV BATTERY CAPACITY REQUIREMENTS

50-1000V ultra wide output range, meeting car types in the market and adapt to high voltage EVs in future

Compatible with the existing 200V-800V platform and provides full power charging for future development above 900V which is able to avoid investment on high voltage EV charger upgrade construction.

Support CCS1, CCS2, CHAdeMO, GB/T and energy storage system.

NXR100200 DC EV Charging Modules can meet the future trend of high-voltage charging of electric vehicles, compatible with various charging applications and car types.

Specification

UXG1K022 22KW V2G Charging Module
Model No.		UXG1K022
AC Input	Input Rating	260Vac-530Vac
	AC Input Connection	3L + PE
	Input Frequency	50/60±5Hz
	Input Power Factor	≥ 0.99
	Input Overvoltage Protection	490±10Vac
	Input Undervoltage Protection	270±10Vac
DC Output	Rated Output Power	20kW
	Output Voltage Range	200Vdc-1000Vdc
	Output Current Range	0.5-67A
	Output Constant Power Range	When output voltage is 200-1000Vdc, constant 22kW will output
	Peak Efficiency	≥96%
	Soft Start Time	3-8s
	Short Circuit Protection	Self-rollback protection
	Voltage Regulation Accuracy	≤±0.5%
	THD	<5%
	Current Regulation Accuracy	≤±1%
	Current Sharing lmbalance	≤±5%
Operation Environment	Operating Temperature (℃)	-40℃~+75℃, derating from 55℃
	Humidity (%)	≤95% RH, non-condensing
	Altitude (m)	≤2000m, derating above 2000m
	Cooling method	Fan cooling
Mechanical	Standby Power Consumption	<10W
	Communication Protocol	CAN
	Address Setting	Digital screen display, keys operation
	Module Dimension	460*218*84mm (L*W*H)
	Weight (kg)	≤ 13Kg
Protection	Input Protection	OVP, OCP, OPP, OTP, UVP, Surge protection
	Output Protection	SCP, OVP, OCP, OTP, UVP
	Electrical Insulation	Insulated DC output and AC input
	MTBF	500 000 hours
Regulation	Certificate	UL2202, IEC61851-1, IEC61851-23, IEC61851-21-2, Class B
	Safety	CE, TUV

Core Features

The UXG1K022 22kw V2G charger module is the inner power module for DC charging stations (piles), and convert AC and DC energy into DC in
order to charge vehicles. The charger module takes a 3-phase current input and then outputs the DC voltage as 150VDC-1000VDC, with an
adjustable DC output to meet a variety of battery pack requirements.

The 22kW V2G charging module UXG1K022 is equipped with a POST (power on self-test) function, AC or DC input over/under voltage protection, 
output over voltage protection, over-temperature protection and other features. Users can connect multiple charger modules in a parallel manner to
one power supply cabinet, and we guarantee that our connect multiple EV chargers are highly reliable, applicable, efficient, and require very little maintenance.

Applications

1. The 22kw V2G charger modules UXG1K022 can be used on DC fast charging stations for EVs and E-buses.

2. The UXG1K022 22kw V2G Power Module is equipped with input overvoltage protection, undervoltage alarming, output overcurrent and short circuit
protection functions. The charger modules can be connected in a parallel system, allowing for a hot swapping and easier maintenance. This also
ensures the system applicability and reliability.

3. The Bidirectional 22kw charger module UXG1K022 is the inner power module for DC charging stations (piles), and convert AC energy into DC in
order to charge vehicles. The charger module takes a 3-phase current input and then outputs the DC voltage as 200VDC-500VDC/ 300VDC-750VDC/ 150VDC-1000VDC, with an adjustable DC output to meet a variety of battery pack requirements.

4. The UXG1K022 22kw charger module is equipped with a POST (power on self-test) function, AC input over/under voltage protection, output over
voltage protection, over-temperature protection and other features. Users can connect multiple charger modules in a parallel manner to one power
supply cabinet, and we guarantee that our connect multiple EV chargers are highly reliable, applicable, efficient, and require very little maintenance

Company Profile

About MIDA

Shanghai Mida EV Power Co., Ltd is a professional supplier of electric vehicle com-ponents,including all kinds of EV plugs and sockets, EV cables, EV connectors, and EV charging stations. All of our products come with CE, PSE, TUV and UL certification. We sell our products to domestic and overseas markets and have a very good re-putation. Our products are especially popular in Europe and the America. At present, Mida EV power pay close attention to the development of new energy auto-motive industry, we determined to become the industry leader and innovator.