| Customization: | Available |
|---|---|
| Connector Type: | CCS1, CCS2, CHAdeMO, GB/T |
| Installation: | Floor Type |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency



Product Number | SK-V2G-22KW/44KW | ||
Working environment | Working temperature | -40°C~+75°ºC, use with derating above 55ºC | |
Storage temperature | -40ºC~+80°C | ||
Relative humidity | 1.8–2.5 | ||
Cooling method | 8.8 | ||
Altitude | 13.6 | ||
Charging mode | AC Input | Rated voltage & input current range | 380/400Vac, three-phase without neutral wire system; 0~43A |
lnput voltage / Frequency range | 260Vac ~ 530Vac; 45Hz ~ 65HZ | ||
Power factor | ≥ 0.99 (full load output) | ||
Current distortion THD | < 5% (50%~100% full load output power) | ||
DC Output | Rated power | 22kW/44kW | |
Output voltage/ current range | 150Vdc ~ 1000Vdc, 0-73.3A | ||
Voltage stabilization accuracy | < +0.5% | ||
Steady flow accuracy | ≤ +1% (output load 20%~100% rated range) | ||
Efficiency | > 95% | ||
Discharge mode | DC Input | DC input voltage & output power | 300Vdc-1000Vdc; 22kW/44kW constant power output |
Maximum current | 73.3A | ||
AC Output | Output AC voltage & Output power | 22kW/44kW constant power output at 260Vac~530Vac; 320Vac~530Vac | |
Rated power/ current output | 22kW/44kW/ 33.3A | ||
AC frequency | 50Hz/60Hz | ||
THD | < 5% | ||
Output power factor | Can be set, setting range is 0.8~1, -0.8~-1 | ||
Efficiency (peak) | >95% | ||
Alarm and protection | Input over/ under voltage protection | ||
Output overvoltage protection | |||
Overcurrent and short circuit protection | |||
Over temperature protection | |||
Emergency stop protection | |||
SPD protection | |||
Dimensions (LxDxH) | 630mm x 260mm x 1600mm Pillar | ||
630mm x 260mm x 750mm Wall | |||
Ingress Protection | IP54 II IK10 | ||
Length of charging cable | 4m/5m (0ptional) | ||
Access Control | RFID: ISO/IEC 14443A/B Credit Card Reader (Optional) | ||
Communication | Ethermet-Standard 3G/4G Modem (Optional) | ||



