DC Charging Module 30kw DC Power Module Th30f10030c7

• Condition: New
• Output Rating: 30kw
• Peak Efficiency: 96%
• Input Undervoltage Protection: 270VAC
• Input Voltage Rage(AC): 285~475
• Input Overvoltage Protection: 495VAC
• Model NO.: TH30F10025C7
• Output Constant Power Range: 30kw with Output 250-1000VDC
• Power: 30kw
• Output Voltage Range: 150-1000V DC
• Purpose: for Replace/Repair
• Soft Start Time: 3-8s
• Trademark: MIDA
• Origin: Shanghai, China
• Production Capacity: 100 Carton/Cartons Per Month

Product Description

 

DC Charging Module 30kw DC Power Module TH30F10030C7

1.3.2Module Features

 

Ø Input voltage rage(AC):285~475

 

Ø Output voltage-adjustment range(DC):150~1000

 

Ø Working temp range:-30~+75ºC

 

Ø Above 1/3 load efficiency:≥95.6%

 

Ø High power factor:full load≥ 0.99

 

Ø Low THD:full load≤ 5%

 

Ø Low standby power loss:<13W

 

Ø Output constant power function:1000-250VDC   30KW

 

Ø Digital technology, current sharing imbalance for modules parallel<±5%

 

Ø CAN bus communication

 

Ø Quick plug and install

 

Ø Short circuit no damage

 

Ø Intelligent fan speed control

 

Ø Support parallel voltage regulation and current regulation function

 

Ø Equipped with perfect protection function

 

ü Input over/under voltage protection, input over current protection, phase loss protection

 

ü Output over voltage protection, current limit protection

 

ü Output prevent reverse irrigation(means "when the external voltage is higher than the output voltage of charging module, it will not cause damage to the module".)

 

ü Environment inspection & protection

 

Ø Group sharing function

 

ü Grouping modules is supported in the system. When grouping output, the module output power lines are required to be isolated from each other. Only CAN bus is connected between each module. The output voltage and current can be controlled independently between each group of modules, which can realize grouping current balance sharing output. It is suggested that the number of modules in each group≤24.

 

1.3.3Technical Specification

 

1, Input Features

 

Item	Parameter	Remark
Working Voltage(AC)	285~475,rated voltage 380	See input voltage/output power curve 1.3.3-1
Input Frequency(HZ)	45~55
Power factor	Full load≥0.99
THD	Full load≤5%
Standby power loss	<13W

 

 

 

 

 

1.3.3-1input voltage/output power curve

 

2, Output Features

 

 

Item	Parameter	Remark
Output Voltage Range(DC)	150~1000
Max output current(A)	120
Output constant power interval	250~500VDC,500~1000VDC
Output current limit range	Max limit current is120A,limit current point can be set between 2~120A	Output voltage/current curve 1.3.3-2
Voltage Stabilization Accuracy	≤±0.5%
Current Stabilization Accuracy	≤±1%(load current is in the range of 20%~100%)
Effective value coefficient of output ripple	≤±0.5%
Current sharing imbalance for modules in parallel	≤±5%(parallel average current should be more than 5A)
Peak efficiency	≥95.5%
Soft start time(S)	3~8
When output, prevent current rewinding	Support
Communication Protocal	CAN

 

 

 

 

 

 

 

4, Environment Features

 

 

Item	Parameter	Remark
Working Temperature(ºC)	-30~75(above 55ºC output derating)
Storage Temperature(ºC)	-40~75
Relative Humidity	%5RH~95%RH  no condensation

 

5, Other Specification

 

 

Item	Parameter	Remark
Insulation Strength	Input to enclosure	4200VDC  1 minute 5mA  No breakdown, no arcing
	Input to output	4200VDC 1 minute  5mA  No breakdown, no arcing
	output to enclosure	4200VDC 1 minute  5mA  No breakdown, no arcing
	Input to communication	4200VDC 1 minute  5mA  No breakdown, no arcing
	Output to communication	4200VDC 1 minute  5mA  No breakdown, no arcing
	Communication to enclosure	1500VDC 1 minute  5mA  No breakdown, no arcing
Others	Protection Lever	IP20
	Module Weight	≤16kg

 

Remark: